www.instrument.com - Wednesday, August 27, 2008
Printer-friendly version of the page "LANpoint XL Specifications"
(URL: http://www.edasce.com/vehicle-terminal-specs.html)
Electronic |
Choice of Pentium III class Via C3 Eden 400MHz or 733MHz processor, with Microsoft Windows CE.NET version 4.2 or Microsoft XP Embedded operating system |
|
128 MB of RAM memory standard; up to 512MB available |
|
128 MB Flash memory for operating system, software, local storage; up to 2GB available |
|
IEEE802.11b RF Ethernet; wired-only RJ45 Ethernet available at reduced cost |
|
25 integral keys include numerics, function keys, cursor and other control keys, ENTER, on/off, brightness and contrast adjustment keys |
|
PS/2 (MiniDIN6) connector for optional full external keyboard |
|
General purpose Cardbus slot, one Type I/II PCMCIA-compatible, usually used for wireless Ethernet |
|
Two V1.1 USB ports |
|
One 32-bit PCI card slot, Rev. 2.2 compatible for ultra short card (max length 141mm) |
|
Heater option extends the operating temperature to -30°C |
Display Options |
10.4" and 12.1" color LCD displays are available |
|
Both sizes of displays are available with various maximum backlight intensities |
|
Both sizes of displays are available with various standard resolutions, including VGA, SVGA, and XGA |
|
Touch screen is standard with either size display |
Power |
Choice of internal power supplies - 12VDC or 24-48VDC for directly connecting to a variety of vehicle. DC power supplies are fully self-contained in the unit, withstand bursts up to 2kV, are electronically and galvanically isolated for reliability, and cover power outages up to 5ms. For stationary, development, or troubleshooting purposes, there are external power converters with 12VDC or 24VDC outputs. Alternatively, the terminal can be ordered with an internal power supply to directly connect to 120/230VAC source. |
|
Automatic switch-off option to prevent unnecessary vehicle battery drain when not in-use |
|
2100 mAh UPS option is available for temporary use without external power source |
Case and mounting |
Coated aluminum |
|
Weatherproof, hose-down, dustproof even without cable cover option |
|
Choice of unsealed, IP54 or IP65 depending on cable cover option |
|
Touch screen may be operated with gloves, fingers, or a stylus |
Physical |
|
10.4" display: |
dimensions: 9.02 x 11.02 x 3.27 inches (229 x 280 x 83 mm) |
|
weight: 10.5 lbs (4.8Kg) |
12.1" display: |
dimensions: 10.31 x 12.56 x 3.9 inches (262 x 319 x 99 mm) |
|
weight: 11 lbs (4.9Kg) |
|
Function keys with visual cues to LCD display for softkeys, menu selection, launching a program, and so on |
|
Optional full keyboard and brackets are available |
|
Many mounting accessories are available for both stationary and vehicle-mount applications |
|
Industrial color scheme for safety and visibility |
|
Quick-release mounting option (RAM) is available for easy swapping of terminal between vehicles and full tilt/swing adjustability Communications and Network Access |
|
Every terminal has a standard RJ45 wired Ethernet port |
|
RF Ethernet is standard on vehicle-mount models - Cisco IEEE802.11b, with internal Cisco antenna; externally mounted antenna (on terminal) is optional, as is cabling for a remotely mounted antenna |
|
Two RS-232 ports standard (COM1 and COM2); the terminal can be ordered with pin 9 of COM1 configured as +5VDC or +12VDC (to power scanners or other accessories) instead of the standard ‘RI’ signal |
|
Two USB ports standard |
Automated Data Collection Options |
Two serial COM ports, and COM1 can be ordered with +5VDC or +12VDC power on pin 9, for serial scanners, EZ-ID fingerprint reader, and other AutoID devices. The included software wedge utility can be used to wedge COM data into the keyboard datastream from any or all COM ports |
|
Keyboard emulation devices (barcode wedges) can be used on the standard PS/2 keyboard port |
|
USB devices can be used with one or both of the USB ports |
|
Brackets for mounting various barcode laser scanners are available |
Programmability |
Microsoft Visual Studio .NET 2003 Professional or higher, including Visual Basic.NET and C#.NET (“C-Sharp”) |
|
Microsoft Visual Studio 6.0 (Windows XP Embedded only) |
|
eMbedded Visual C++ 4.0 (eVC++ 4.0), free from Microsoft (Windows CE.NET only) |
|
Software Development Kit (SDK) is included at no additional cost |
Terminal management |
Built-in Web server provides remote system management via standard Web browser (Windows CE.NET only): |
|
File management - view files & directories, upload, download, delete files, create and delete directories |
|
Application management - view running programs, launch a program, terminate a program |
|
Security - manage remote management security settings |
Terminal emulation thin client software pre-loaded on with the Windows CE.NET operating system models |
IBM5250, IBM3270, VT, or HP text-based terminal emulation can be run in demo mode at any time. It requires the purchase of a separate license to be used in production mode. |
|
Microsoft Terminal Services Client (Windows GUI thin-client) is included on each terminal |
Environmental and regulatory |
CE/FCC Class A |
Operating Temperature |
0° to 50° C (32° to 122° F) |
|
-30° to 50° C (-22° to 122° F) with heater option |
Storage Temperature |
-20° to 60° C (-4° to 140° F) |
Relative Humidity |
5% to 95% at 40° C, non-condensing, in accordance with EN 60068-2-3 |
Sealing |
IP54 |
|
IP65 with sealed cable cover |
Vibration |
Class 7M3 according to EN 60721-3 (1995) |
Shock |
Class 7M3 according to EN 60721-3 (1995) |
|
|
|
MANY MORE SPECIFICATIONS LISTED IN THE MAIN MANUAL |
Copyright 1996-2008 Intelligent Instrumentation Inc.