www.instrument.com - Tuesday, January 6, 2009
Printer-friendly version of the page "Vehicle Mount Power Specifications"
(URL: http://www.edasce.com/forklift-terminal-power-supply.html)

LANpoint 7 & LANpoint CE.NET Vehicle Mount Power Supply Specifications Page

Vehicle Mount Power Supply Specifications

Aluminum enclosure. LPP105 is also epoxy-filled.

Constructed to a high standard to tolerate adverse environmental conditions.

Durable for vehicular applications.

Supports battery supply variations.

High and low voltage windows for shutoff, to protect the terminal from overvoltage damage.

Remote low power switch on all units. Can also be wired for direct connection.

Vehicle Mount Power Supplies - Common Specifications and Characteristics

Efficiency: >80%.

Switching Frequency: 50 KHz.

All units are CE Marked.

Conformance to: EMC EN 55022, EN50081-1, EN50082-1, FCC Class B, UL 1950.

Input Protection: Reverse polarity, with additional protection: (See below)

Output Protection: (See below)

Mounting: All mounting holes 5 mm (.2") diameter.

Weight: LPP101(12VDC) & LPP102(24VDC): .5 Kg / 1.1 lbs.; LPP103(36VDC) & LPP104(48VDC): .35 Kg / .8 lbs; LPP105(72VDC): 1.6Kg / 3.5 lbs.

Remote Switch: All units

Switch connection: To use remote switch, connect the remote input to one side of switch, and the + input to the other side. If switch is not required, the switch input must be connected to + input.

Nominal input voltage must be applied to remote switch line to turn unit on.

Part Number	DC Input Voltage Nominal	Range	Output Voltage (Nominal)	Output Current Continuous	Max	Output Voltage Regulation 0-10%**	0-100%**	Output Ripple (mV)	No-Load Input (mA)	Protection Input/ Output
LPP101	12.0	11–15	24.0 ±.5	2.5A***	3A / 30	0.4V	0.2V	<60	<100	A / D
LPP102	24.0	18–32	24.0 ±.5	3A***	5A / 15	0.4V	0.2V	<50	<100	C / E
LPP103	36.0		24.0 ±.5							/D
LPP104	48.0	29–59	24.0 ±.5	2.5A****	3A / 30	0.2V	0.1V	<100	<20	B / E
LPP105	72.0	70–140	24.0 ±.5	5A		0.4V	0.6V	<100	<40	E / F

* 50% duty cycle, 30 minutes
** Percentage of load
*** Current at 40º C
**** Current at 30º C
LPP105 has flying lead wires (250 mm / 12" long); all other units have 1/4" tabs.

Input Protection (in addition to reverse polarity):

A	Low-voltage switch off at approximately 9.0 V; High-voltage switch off at approximately 15.0 V.
B	Low-voltage switch off at approximately 18.0 V.
C	Low-voltage switch off at approximately 18.0 V; High-voltage switch off at approximately 34.0.
D	Low-voltage switch off at approximately 36.0 V; High-voltage switch off at approximately 68.0.
E	Low-voltage switch off at approximately 17.0 V; High-voltage switch off at approximately 150V.

Output Protection:

A	Electronic fold back current limit at 6.5 A.
B	Electronic fold back current limit at 10.5 A.
C	Electronic fold back current limit at 21 A.
D	Electronic fold back current limit at 3.5 A.
E	Electronic fold back current limit at 5.3 A.
F	Electronic fold back current limit at approximately 120% of output current, overvoltage crowbar.